Description
Ebco ESmart Digital Lock – Cabinet 1P – RFID
The Ebco ESmart Digital Lock – Cabinet 1P – RFID is an RFID-based digital locking solution designed for shutters with a thickness of 15–22 mm. It can be programmed without software or a PC and supports manual close, automatic close and public user modes.
RFID Access
The lock uses a 125KHz frequency for RFID access. A Management (Programming) Card is used to create a User Card, while the User Card functions as the key of the lock.
The same RF can be shared by all the locks.
Function Modes
- Manual Close Mode
- Automatic Close Mode
- Public User Mode
Key Features
- Easy programming without software or PC
- Automatic lock function
- Easy installation
- Suitable for shutter thicknesses of 15–22 mm
- 125KHz operating frequency
- ABS front case and lock housing
Technical Specifications
- Model: ESmart Digital Lock – Cabinet 1P – RFID
- Item Code: ESDL-C1P-R
- Finish: Black
- Shutter Thickness: 15–22 mm
- Frequency: 125KHz
- Working Current: 180 mA–280 mA
- Working Temperature: 0°C–40°C
- Working Voltage: 4.5V
- Working Humidity: 20%–80%
- Front Case & Lock Housing: ABS
- Power Supply: 3 standard AAA alkaline batteries (not included)
Cards & Accessories
- Management Card 1: ESDL-MC1
- User Card 1: ESDL-UC1
- Emergency Battery Pack: ESDL-EBPC1
- Emergency Power Cable: ESDL-EPC1
The Management Card, User Card, Emergency Battery Pack and Emergency Power Cable are listed as accessories and are to be purchased separately or as required. The Emergency Battery Pack has a 2.5 mm plug, a load capacity of four AA alkaline batteries and a 160 mm cable length.
Installation
The supplied fitting instructions show the installation arrangement for the lock, including inset and overlay door configurations. The fitting diagram also provides the relevant installation dimensions.
Available at Senbaga Life Spaces. Contact us to enquire about the Ebco ESmart Digital Lock – Cabinet 1P – RFID and its compatibility with your application.
